SCANTECH ID (Champtek company) SG300RFM - Manual (Page 32)

28
>
IATA 25
Enable IATA 25
<Disable IATA 25>
4.9 Matrix 25
> Check Digit Transmission
<Do not Calculate Check
Digit>
Calculate Check Digit and
Transmit
Calculate Check Digit and
Not Transmit
>
Setup Code Length
1. Scan the “Set Begin” Bar Code (2 Sets
Available)
2. Go to Decimal Value Table in Appendix A,
scan Bar Code(s) that represents the code
length
3. Scan the “Complete” Bar Code
Repeat Steps 1-3 to set additional lengths
< Variable>
The output would be the
same as the barcode’s length.
There is no limit in length for
the reading output.
Fix Length (2 Sets Available)