SCANTECH ID (Champtek company) SG300RFM - Manual (Page 49)

45
Enable Space
Once data are displayed, the
cursor will skip a space to get
ready for the next data.
Enable Tab(HT)
Once data are displayed, the
cursor will skip a tab to get
ready for the next data.
Enable STX-ETX
Before displaying a data, this
function will add a STX ASCII
code in front of the data, and
an ETX ASCII code at the end
of the data. This function is
only limited to RS232
interface.
5.2 Insertion Data
You can insert character for up to 6 different
barcode types.
Steps 1. Scan the bar code for the desired Set
2. Scan the bar code of the desire bar
code type
3. Scan Bar Code(s) that represents the
position of digit number to be
inserted.(99 = Last digit)
4. Scan the Compete of “Character
Position to be inserted”
5. Go to Appendix B or Appendix C,
scan Bar Code(s) that represents the
desired characters to be inserted
6. Scan the “Complete” Bar Code