SCANTECH ID (Champtek company) SG300RFM - Manual (Page 44)

40
the scanner will not
output the data.
2
Decimal Value Appendix A
3
Minimum Length
Complete
3
Minimum Length
Complete
4.16 LCD 25
>
Check Digit Transmission
Do not Calculate Check
Digit
Calculate Check Digit and
Transmit
<Calculate Check Digit and
Not Transmit>
>
Setup Code Length
1. Scan the “Set Begin” Bar Code (2 Sets
Available)
2. Go to Decimal Value Table in Appendix A,
scan Bar Code(s) that represents the code
length
3. Scan the “Complete” Bar Code
Repeat Steps 1-3 to set additional lengths
< Variable>
The output would be the
same as the barcode’s
length. There is no limit in
length for the reading
output.