Net Optics GigaBit Fiber SFP Port Aggregator Tap - Manual (Page 10)

GigaBit Fiber Port Aggregator Tap
6
Connecting to the Network
Optical connections are extremely sensitive to contaminants . Make sure all
optical surfaces are clean before connecting .
To connect to the Network Ports:
1 . Remove protective plugs .
2 . Connect Network Port A to the appropriate network device using a Duplex
LC cable .
3 . Connect Network Port B to the appropriate network device using a Duplex
LC cable .
4 . Verify that the Tap Network Ports are cabled in-line between two devices .
Figure 4: Connecting to the Network
To Span Port
To Span Port
www.netoptics.com
Port Aggregator
1
Network Monitor
2 A B
1
2
2
1
B
A
LINK