Net Optics Optical Bypass Switch w_Heartbeat - Manual (Page 15)

11
Optical Bypass Switch with Heartbeat
To restore the bypass switch to factory defaults:
1 . Type z and press Enter. You are prompted to select which type of packet
you want to restore, IP or IPX.
2. Select 1 to restore defaults with an IP packet or 0 to restore defaults with
an IPX packet.
The bypass switch will be reset to the following defaults:
Input Timeout Period: 1
Input Retry Count: 3
LFD: On
Bypass Detect: On
Heartbeat Packet: IPX
Connecting to the Network
To connect the bypass switch to the network:
1 . Connect Network Port A to the appropriate switch, server or router device .
This acts as your DCE interface.
2 . Connect Network Port B to the appropriate switch, server or router device .
This acts as your DTE interface.