Net Optics 10_100_1000 Bypass Switch - Manual (Page 8)

4
10/100/1000 Bypass Switch
Cabling Guidelines
10/100 Devices:
• If connecting to Switches or Hubs, use CAT5 cross-over cabling .
• If connecting to Routers or NICs, use CAT5 straight-through cabling .
GigaBit Devices:
• Use CAT5e straight-through cabling .
Connecting to the Network
1 . Connect Network Port A to the appropriate switch, server, or router device .
2 . Connect Network Port B to the appropriate switch, server, or router device .
3 . Verify that the Bypass Switch Network Ports are cabled in-line between
two devices .
Figure 4: Connecting to the Network
A B A B
Network Control
Monitor
Bypass Switch
10/100/1000
www.netoptics.com
®
To network switch or router To network switch or router