Asus RS740-E7-RS24-EG - Manual (Page 43)

2-19 ASUS RS740-E7-RS24-EG
To install a 2.5-inch SSDs:
1.
Press the spring lock to release to
release the tray lever.
spring lock
tray lever
Installing 2.5-inch SSDs on the rear panel
The two 2.5-inch SSD on the rear panel are hot-swappable drives.
7. Secure the 3.5-inch SATA / SAS HDD
into the drive tray using four (4) 3.5-inch
HDD tray screws that is bundled with
your server.
8. Align and insert the 3.5-inch SATA /
SAS HDD and drive tray assembly
into the drive bay.
9. Push the drive tray all the way into
the drive bay then push the tray lever
until it clicks into place.
10. Repeat steps 1—9 to install the other
hot-swappable 3.5-inch SATA / SAS
HDDs.
2. Firmly hold the tray lever then pull the
drive tray out of the bay.
3