Asus RS740-E7-RS24-EG - Manual (Page 57)

2-33 ASUS RS740-E7-RS24-EG
To replace a redundant power supply module:
1.
Draw out the metal pull handle of the power
supply module that you wish to replace.
2. Press the lock (A) then pull the power
supply module via the metal pull handle
(B). As you remove the power supply
module from the bay, use your other
hand to support the power supply
module.
3. Prepare the replacement power supply
module.
Ensure to remove the plastic covering
the power supply module before
installing the module.
4. Carefully insert the replacement power
supply module all the way into the bay.
5. Press the lock (C) then push the power
supply module until it is securely seated
in place (D).
6. Fold the metal handle to tuck it back
into place (E).
Replacing a redundant power supply module
A
B
C
D
E