Asus RS740-E7-RS24-EG - Manual (Page 48)

Chapter 2: Hardware setup 2-24
2.6.3 Installing the full-height and full-length graphics card
support bracket
The RS740-E7-RS24-EG comes with a support bracket as an additional accessory that
allows you to install full-length or full-height graphics cards.
To install the full-height and full-length graphics card support bracket:
1. Remove the chassis cover and the air duct. Refer to section 2.1 Chassis cover and
2.1.1 Air duct for details.
2. Prepare the full-height and full-length graphics card support bracket and the two (2)
screws.
3. Locate the full-height and full-length graphics card support bracket slots on the server.
screw hole
tab
clip
screw hole
tab
hinge
1 2
tab slot
clip slot
chassis screw hole
tab slot
hinge slot
chassis screw hole