Asus RS740-E7-RS24-EG - Manual (Page 52)

Chapter 2: Hardware setup 2-28
2.9 System Fans (Optional)
The server have two easy-swap front system fans (120mm x 38mm) and two rear system
fans (80mm x 38mm) for optimum heat dissipation and efficient cooling solution for your
server.
• Ensure that the system is turned off before removing any components.
• Discharge static electricity by touching any metal surface.
• Use the same model, size, and type of fans.
To replace a front system fan:
1. Locate the front system fan that you want to replace.
2. Press the fan lock (A) to disengage the fan from the fan slot then pull the fan up (B) to
remove it.
2.9.1 Replacing the front system fans
The server comes with two (2) front system fans that draw cooler air into the chassis to help
maintain low temperature inside the server.
1 2
B
A
3. Prepare a replacement fan of the same type and size.
fan lock