Asus RS740-E7-RS24-EG - Manual (Page 71)

ASUS RS740-E7-RS24-EG 4-7
6. DDR3 thermal event setting (3-pin DIMMTRIP1)
This jumper allows you to enable/disable DDR3 DIMM thermal sensing event pin.
7. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 1–2 to use the third party software LSI
MegaRAID software RAID Configuration Utility; otherwise, place the jumper caps to
pins 2–3 to use the Intel ® Rapid Storage Technology enterprise SATA Option ROM
Utility.