Asus TS100-E5/PI4 - Manual (Page 124)

5-34 Chapter 5: RAID configuration
4. Select all the drives required for the RAID set, then press <Enter>. The
configurable array appears on screen.
5. Press <F10>, select the configurable array, then press <SpaceBar>.
6. Press <F10> again, and select RAID from the Logical Drive menu, then
press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 3 DISK 77247MB HDS728080PLA380 PF20A60A
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
1
2
3
ONLIN A00-00
ONLIN A00-01
ONLIN A01-00
ONLIN A01-01
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
0
1
View/Add Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
A-0
SPAN-1