Asus TS100-E5/PI4 - Manual (Page 40)

Chapter 2: Hardware setup 2-22
2.9 Connecting cables
The TS100-E5/PI4 chassis includes the power and signal cables that you need to
connect to the motherboard, storage drives, and other devices that you intend to
install.
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
1 2
3
4
5
6
7
8
Standard cables connected to the motherboard
1. 4-pin ATX 12V power plug
2. 24-pin ATX power plug
3. Floppy disk drive ribbon cable
4. Front panel USB 2.0 cable 5. IDE signal cable
6. Serial ATA signal cables
7. System panel cable
8. System fan cable