Asus TS100-E5/PI4 - Manual (Page 53)

3-13 ASUS TS100-E5/PI4
8. ATX power connectors (24-pin ATXPWR1, 4-pin ATX12V1)
These connectors are for SSI power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation
and push down firmly until the connectors completely fit.
• For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 450 W.
• Do not forget to connect the 4-pin ATX12V1 power plug; otherwise, the
system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• If you are uncertain about the minimum power supply requirement for your
system, refer to the Recommended Power Supply Wattage Calculator
at http://support.asus.com/PowerSupplyCalculator/PSCalculator.
aspx?SLanguage=en-us for details.
®
P5BV-C/4L/TS100-E5
P5BV-C/4L/TS100-E5 ATX Power Connector
+3
Vo
lts
+3
Vo
lts
Ground +5
Vo
lts
+5
Vo
lts
Ground Ground Power OK +5V Standby +1
2
Vo
lts
-5 V
olt
s
+5
Vo
lts
+3
Vo
lts
-1
2
Vo
lts
Ground Ground Ground PSON# Ground
+5
Vo
lts
+1
2
Vo
lts
+3
Vo
lts
+5
Vo
lts
Ground
ATXPWR1 ATX12V1
+1
2V
D
C
G
ND
+1
2V
D
C
G
ND