Asus RS120-E4/PA4 - Manual (Page 124)

6-18 Chapter 6: RAID Configuration
6.2.4. Initializing.the.logical.drives
After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the Initialize or Objects command
in the Management Menu.
Using.the.Initialize.command
To initialize the logical drive using the Initialize command:
1. From the Management Menu, highlight Initialize, then press <Enter>.
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Use the arrow keys to select the logical drive from
the Logical Drive selection, then press <Enter>.