8 apm configuration, Power.management/apm.[enabled, Video.power.down.mode.[suspend – Asus RS120-E4/PA4 User Manual

Page 95: Hard.disk.power.down.mode.[suspend, Suspend.time.out(minnute).[disabled, Throttle.slow.clock.ratio.[50, Power.button.mode.[on/off, Restore.on.ac.power.loss.[last.state

Advertising
background image

ASUS RS120-E4/PA4

5-29

5.4.8

APM Configuration

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

Enable or disable APM.

APM Configuration

Power Management/APM

[Enabled]

Video Power Down Mode

[Suspend]

Hard Disk Power Down Mode

[Suspend]

Suspend Time Out(Minnute)

[Disabled]

Throttle Slow Clock Ratio

[50%]

Power Button Function

[On/Off]

Restore on AC Power Loss

[Last State]

Resume On Ring

[Disabled]

Resume On LAN

[Disabled]

Resume On PME#

[Disabled]

Power On By PS/2 Keyboard

[Disabled]

Power On By PS/2 Mouse

[Disabled]

Resume On RTC Alarm

[Disabled]

Power.Management/APM.[Enabled]

Allows you to enable or disable the motherboard Advance Power Management

(APM) feature. Configuration options: [Enabled] [Disabled]

Video.Power.Down.Mode.[Suspend]

Allows you to select the video power down mode

Configuration options: [Disabled] [Standby] [Suspend]

Hard.Disk.Power.Down.Mode.[Suspend]

Allows you to select the hard disk power down mode

Configuration options: [Disabled] [Standby] [Suspend]

Suspend.Time.Out(Minnute).[Disabled]

Allows you to select the specified time at which the system goes on suspend mode.

Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min]

[30 Min] [40 Min] [50 Min] [60 Min]

Throttle.Slow.Clock.Ratio.[50%]

Allows you to select duty cycle in throttle mode.

Configuration options: [87.5%] [75.0%] [62.5%] [50%] [37.5%] [25%] [12.5%]

Power.Button.Mode.[On/Off]

Allows the system to go into On/Off mode or suspend mode when the power button

is pressed. Configuration options: [On/Off] [Suspend]

Restore.on.AC.Power.Loss.[Last.State]

When set to [Power Off], the system goes into off state after an AC power loss.

When set to [Power On], the system goes on after an AC power loss. When set to

[Last State], the system goes into either off or on state, whatever the system state

was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

BIOS SETUP UTILITY

Advanced

Advertising