Asus RS120-E4/PA4 - Manual (Page 129)

ASUS RS120-E4/PA4 6-23
6.2.5. Rebuilding.failed.drives
You can manually rebuild failed hard disk drives using the Rebuild or Objects
command in the Management Menu.
Using.the.Rebuild.command
To rebuild a failed hard disk drive using the Rebuild command:
1. From the Management Menu, highlight Rebuild, then press <Enter>.
2. The PHYSICAL DRIVES SELECTION MENU displays the available drives
connected to the SATA ports. Select the drive you want to rebuild, then press
<SpaceBar>.