Asus RS120-E4/PA4 - Manual (Page 96)

5-30 Chapter 5: BIOS setup
Resume.On.Ring.[Disabled]
When set to [Enabled], the system enables the RI to generate a wake event while
the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume.On.LAN.[Disabled]
When set to [Enabled], the system enables the LAN to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume.On.PME#.[Disabled]
When set to [Enabled], the system enables the PME to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Power.On.By.PS/2.Keyboard.[Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power.On.By.PS/2.Mouse.[Disabled]
When set to [Enabled], this parameter allows you to use the left button of a PS/2
mouse to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event.
Configuration options: [Disabled] [Enabled]
The RTC.Alarm.Date and System.Time items appear only when the Resume.
On.RTC.Alarm item is enabled.
RTC Alarm Date [15]
To set the alarm date, highlight this item and press the <+> or <-> key to
make the selection. Configuration options: [Everyday] [1] [2] [3]... ~ [31]
System.Time.[XX:XX:XX]
To set the system time, use <Enter>, <Tab> or <Shift-Tab> to highlight the hour/
minute/second fields and press the <+> or <-> key to configure the system time.
Configuration options: [00] [1]... ~ [23]