Asus RS120-E4/PA4 - Manual (Page 29)

2-13 ASUS RS120-E4/PA4
2.5 Expansion slot
2.5.1. Installing.an.expansion.card.to.the.riser.card.bracket
The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install a PCI-X and/or a PCI Express x8 expansion cards.
To install a PCI-X card:
2. Place the riser card bracket on a
flat and stable surface, then remove
the screw from the PCI-X slot bay.
3. Install a PCI-X card to the bracket
as shown, then secure the card
with a screw.
1. Firmly hold the riser card bracket,
then pull it up to detach it from the
PCI Express x8 and PCI-X slots on
the motherboard.
PCI-X slot