Asus RS120-E4/PA4 - Manual (Page 23)

2-7 ASUS RS120-E4/PA4
The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
6. Close the load plate (A), then push
the load lever (B) until it snaps into
the retention tab.
A
B
The motherboard supports Intel ® Pentium ® 4 LGA775 processors with the Intel
® Enhanced Memory 64 Technology (EM64T), Enhanced Intel SpeedStep ®
Technology (EIST), and Hyper-Threading Technology. Refer to the Appendix for
more information on these CPU features.
2. Twist each of the four screws with
a Philips (cross) screwdriver just
enough to attach the heatsink to
the motherboard. When the four
screws are attached, tighten them
one by one to completely secure the
heatsink.
2.2.2. Installing.the.CPU.heatsink.and.airduct
To install the CPU heatsink:
1. Carefully place the heatsink on top
of the installed CPU.