Asus RS120-E4/PA4 - Manual (Page 86)

5-20 Chapter 5: BIOS setup
Virtualization.Technology.[Enabled]
Enable this item when the processor supports this feature. Reset to change its
state. Configuration options: [Enabled] [Disabled]
Execute.Disable.Bit.[Enabled]
When this item is set to [Disabled], the BIOS forces the XD feature flag to always
return to (0). Configuration options: [Enabled] [Disabled]
The Hyper-Threading Technology item appears only when you installed an
Intel ® Pentium ® 4 CPU that supports the Hyper-Threading Technology. Hyper-
Threading is not supported when you installed a dual-core CPU.
Core.Multi-Processing.[Enabled]
Setting this item to [Disabled] disables one execution core.
Configuration options: [ Enabled] [Disabled]
Intel(R).SpeedStep(tm).tech..[Automatic]
Allows you to enable or disable the Intel SpeedStep Technology. Refer to the
Appendix for more information on the Intel SpeedStep Technology.
Configuration options: [Automatic] [Disabled]
C1 Config. [Enhanced]
[Standard] means the conventional C-State; [Enhanced] means the enhanced
C-State. Configuration options: [Standard] [Enhanced]
5.4.2 MPS Configuration
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
MPS Configuration
MPS Revision [1.4]
MPS.Revision.[1.4]
Allows you to select the multi-processor system version.
Configuration options: [1.1] [1.4]
Select MPS
Revision