Resetting a raid set hard disks drive – Asus TS150-E2 User Manual
Page 116
C h a p t e r 6 : R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
6 - 8
6 - 8
6 - 8
6 - 8
6 - 8
Resetting a RAID set hard disks drive
Resetting a RAID set hard disks drive
Resetting a RAID set hard disks drive
Resetting a RAID set hard disks drive
Resetting a RAID set hard disks drive
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1.
From the utility main menu, select [ 3 . R e s e t D i s k s t o N o n - R A I D ]
[ 3 . R e s e t D i s k s t o N o n - R A I D ]
[ 3 . R e s e t D i s k s t o N o n - R A I D ]
[ 3 . R e s e t D i s k s t o N o n - R A I D ]
[ 3 . R e s e t D i s k s t o N o n - R A I D ],
then press <Enter> to display the following screen.
Resetting RAID data will remove the internal RAID structures
from the selected RAID disks. By removing these structures
the drive will revert back to a Non-RAID disk.
[
RESET RAID DATA
]
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model
Serial #
Size
Status
0 STXXXXXXXXX
XXXXXXXX
XX.0GB
Member Disk
1 STXXXXXXXXX
XXXXXXXX
XX.0GB
Member Disk
Select the disk that should be reset
[ ]-Previous/Next
[ ]-Previous/Next
[Space]-Selects
[Space]-Selects
[Enter]-Selection Complete
[Enter]-Selection Complete
2.
Use the up or down arrow keys to highlight the RAID set drive you
want to reset, then press <Space> to select.
3.
Press <Enter> to reset the RAID set drive. A confirmation window
appears.
4.
Press <Y> to reset the drive; otherwise, press <N> to return to the
utility main menu.
5.
Follow steps 2-4 to select and reset other RAID set drives.