Asus TS150-E2 - Manual (Page 18)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 2 - 2 2 - 2 2 - 2 2 - 2
2.1 Preparation
Basic components to install Basic components to install Basic components to install Basic components to install Basic components to install
You need to install the following components to the barebone server.
1. Central processing unit (CPU)
2. Dual Inline Memory Module(s) (DIMMs)
3. Hard disk drive
4. 5.25-inch drive(s)
5. Expansion card(s)
Tool Tool Tool Tool Tool
You need a Phillips (cross) screw driver to install some system
components.
2.2 Removing the side cover
To remove the side cover:
1. Locate the two side cover locks.
1 1 1 1 1
1 1 1 1 1
2. Press the side cover locks
outward, then pull the side cover
toward the rear panel for about
one-half inch.
2 2 2 2 2