Asus TS150-E2 User Manual
Page 34
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
2 - 1 8
2 - 1 8
2 - 1 8
2 - 1 8
2 - 1 8
2.7.2
2.7.2
2.7.2
2.7.2
2.7.2
Installing additional optical drive(s)
Installing additional optical drive(s)
Installing additional optical drive(s)
Installing additional optical drive(s)
Installing additional optical drive(s)
1.
Select the drive bay you
intend to use. Push the knock
down metal cover in and out
of the chassis until it is
removed.
2.
Carefully insert the drive to
the bay, then push it inward
until it is flushed to the
chassis front panel.
3.
Align the optical drive and bay
screw holes.
4.
Secure the drive with two
screws on both sides of the
bay.
S c r e w h o l e s
S c r e w h o l e s
S c r e w h o l e s
S c r e w h o l e s
S c r e w h o l e s
3
3
3
3
3
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
Configure your optical drive as Master/Slave device before installing it to
the drive bay. Refer to the optical drive documentation for details.
To install an additional optical drive(s):