Asus TS150-E2 - Manual (Page 45)

3 - 5 3 - 5 3 - 5 3 - 5 3 - 5 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2
4. Align the drive cage and
retention base rails, then
slightly push the cage until it
clicks in place.
5. Connect the other end of the
Serial ATA cable to the SATA
connector on the
motherboard.
6. Connect a 4-pin power plug
from the power supply unit to
the power connectors at the
back of the drive.
Use a Serial ATA power cable
and adapter for Serial ATA
HDD(s) without a 4-pin power
connector.