Asus TS150-E2 - Manual (Page 35)

2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2
5. Connect a 40-pin IDE cable
(from the first optical drive)
to the IDE connector on the
drive. 6. Connect a 4-pin power plug
from the power supply unit to
the drive power connector.
6 6 6 6 6 5 5 5 5 5
7. Remove the front panel bay
cover opposite the drive bay
you used by pressing the
hooks inward.
Follow the same procedures
when installing additional
optical drives.
8 8 8 8 8 7 7 7 7 7
8. Reinstall the front panel and
side covers when done.