Asus TS150-E2 - Manual (Page 99)

5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2
Allocate IRQ to PCI VGA [Yes] Allocate IRQ to PCI VGA [Yes] Allocate IRQ to PCI VGA [Yes] Allocate IRQ to PCI VGA [Yes] Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card
requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the
PCI VGA card even if requested. Configuration options: [Yes] [No]
Palette Snooping [Disabled] Palette Snooping [Disabled] Palette Snooping [Disabled] Palette Snooping [Disabled] Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled]
Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.
Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
Reserved Memory Size [Disabled] Reserved Memory Size [Disabled] Reserved Memory Size [Disabled] Reserved Memory Size [Disabled] Reserved Memory Size [Disabled]
Allows you to choose the size of memory block to be reserved for legacy
ISA devices. Configuration options: [Disabled] [16K] [32K] [64K]
DMA Channel X [PCI Device] DMA Channel X [PCI Device] DMA Channel X [PCI Device] DMA Channel X [PCI Device] DMA Channel X [PCI Device]
When set to [PCI Device], the specific DMA channel is free for use of
PCI/PnP devices. When set to [Reserved], the DMA channel is reserved for
legacy ISA devices. Configuration options: [PCI Device] [Reserved]
Active State Power-Management [Enabled] Active State Power-Management [Enabled] Active State Power-Management [Enabled] Active State Power-Management [Enabled] Active State Power-Management [Enabled]
Allows you to enable or disable the PCI Express L0s and L1 link power
states. Configuration options: [Disabled] [Enabled]