Asus TS500-E2 - Manual (Page 26)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 6 2 - 6 2 - 6 2 - 6 2 - 6
3. Position the CPU above the socket
as shown.
4. Carefully insert the CPU into the
socket until it fits in place.
5. Carefully push down the socket
lever to secure the CPU. The lever
clicks on the side tab to indicate
that it is locked.
6. Apply the thermal interface
material (thermal grease) to the
top of the CPU. This thermal
grease should come with the CPU
package.
7. Repeat steps 1 to 6 if you wish to
install a second CPU.
The CPU fits only in one correct
orientation. DO NOT force the
CPU into the socket to prevent
bending the pins and damaging
the CPU!
M a r k e d c o r n e r M a r k e d c o r n e r M a r k e d c o r n e r M a r k e d c o r n e r M a r k e d c o r n e r
( g o l d a r r o w )
( g o l d a r r o w ) ( g o l d a r r o w ) ( g o l d a r r o w ) ( g o l d a r r o w )