Asus TS500-E2 - Manual (Page 41)

2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2
2.8 Expansion cards
The chassis is designed with a screwless expansion slot frame on the rear
panel. This design feature allows you to install or remove an expansion card in
less steps.
Make sure to unplug the power cord before installing or removing expansion
cards. Failure to do so may cause physical injury, and damage to the card
and motheboard components!
2.8.1 2.8.1 2.8.1 2.8.1 2.8.1 Installing a standard size expansion card Installing a standard size expansion card Installing a standard size expansion card Installing a standard size expansion card Installing a standard size expansion card
To install a standard size expansion card:
1. Remove the plastic card lock opposite the slot where you wish to install
the expansion card. Release the card lock by pressing the center tabs
and pushing outward. Set the card lock aside for later use.
2. Carefully install an expansion card
making sure that it is properly
seated on the slot.
C a r d l o c k t a b C a r d l o c k t a b C a r d l o c k t a b C a r d l o c k t a b C a r d l o c k t a b