Asus TS500-E2 - Manual (Page 55)

2 - 3 5 2 - 3 5 2 - 3 5 2 - 3 5 2 - 3 5 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2
2.10.3 2.10.3 2.10.3 2.10.3 2.10.3 HDD blower HDD blower HDD blower HDD blower HDD blower
To remove the HDD blower:
1. Lay down the system on its side, on a flat and stable surface.
2. Remove the side cover. Refer to section “2.1.1 Removing the side cover”
for instructions.
3. Disconnect the 3-pin fan cable
from the fan connector on the
backplane.
3. Push the fan into the chassis until the four hooks lock securely into the
holes on the rear panel.
4. Reconnect the 3-pin fan cable from the connector REAR_FAN1 on the
motherboard.
NCLV-D2 Series Fan connectors
GND
Rotation
+12V
REAR_FAN2 REAR_FAN1
FRNT_FAN1 FRNT_FAN2
GND Rotation +12V
CPU_FAN2
REAR_FAN2
REAR_FAN1
FRNT_FAN1
FRNT_FAN2
CPU_FAN1
GND F
ANPWR2
F
ANOUT4
CPU_FAN2 CPU_FAN1
GND F
ANPWR2
F
ANOUT4
GND
Rotation
+12V GND
Rotation
+12V
NCLV-DS2 Fan connectors