Asus TS500-E2 - Manual (Page 51)

2 - 3 1 2 - 3 1 2 - 3 1 2 - 3 1 2 - 3 1 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2 A S U S T S 5 0 0 - E 2
2.10 Removable components
You may need to remove previously installed system components when
installing or removing system devices, or when you need to replace defective
components. This section tells how to remove the following components:
1. Air duct
2. Chassis fan
3. HDD blowers
4. SATA/SCSI backplanes
5. Floppy disk drive module
6. Front I/O board
7. Chassis footpads and roller
wheels
8. Power supply
2.10.1 2.10.1 2.10.1 2.10.1 2.10.1 Air duct Air duct Air duct Air duct Air duct
The barebone server system features an air duct that provides cool air from
the outside through the chassis side cover vent for the system to maintain
optimum thermal performance . The HDD blowers circulate cool air within the
system.
To uninstall the air duct:
1. Press, then slide down the blue
tab in the middle of the top
lock.
B
A
2. Simultaneously push up the side
locks at the lower part of the air
duct.
3. Carefully pull out the air duct out
of the chassis, and set it aside.