Asus RS260-E3/RS8 - Manual (Page 33)

A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 2 - 1 3 2 - 1 3 2 - 1 3 2 - 1 3 2 - 1 3
2.3 System memory
The motherboard comes with eight Double Data Rate 2 (DDR II) Dual Inline
Memory Module (DIMM) sockets to support 240-pin DDR II modules.
The figure illustrates the location of the DDR II DIMM sockets :
2.3.1 2.3.1 2.3.1 2.3.1 2.3.1 Memory configurations Memory configurations Memory configurations Memory configurations Memory configurations
You may install 256 MB, 512 MB, and 1 GB registered ECC DDR II DIMMs
into the DIMM sockets.
®
PVL-D/2U/SCSI
DIMM_A1
DIMM_B1
PVL-D/2U/SCSI 240-pin DDR2 DIMM sockets
DIMM_A2
DIMM_B2
DIMM_A3
DIMM_B3
DIMM_A4
DIMM_B4
112 Pins 128 Pins
• Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR Qualified Vendors List at the
ASUS web site.
• Due to chipset resource allocation, the system may detect less than 16 GB
system memory when you installed eight 2 GB DDR II memory modules.
• This motherboard does not support memory modules made up of 128
Mb chips or double-rank x16 memory modules.
• If you are installing only one memory module, install into the blue socket
labeled DIMM_B4. Installing into any other socket would not work.
M o d e M o d e M o d e M o d e M o d e DIMM_B4 DIMM_B4 DIMM_B4 DIMM_B4 DIMM_B4 DIMM_A4 DIMM_A4 DIMM_A4 DIMM_A4 DIMM_A4 DIMM_B3 DIMM_B3 DIMM_B3 DIMM_B3 DIMM_B3 DIMM_A3 DIMM_A3 DIMM_A3 DIMM_A3 DIMM_A3 DIMM_B2 DIMM_B2 DIMM_B2 DIMM_B2 DIMM_B2 DIMM_A2 DIMM_A2 DIMM_A2 DIMM_A2 DIMM_A2 DIMM_B1 DIMM_B1 DIMM_B1 DIMM_B1 DIMM_B1 DIMM_A1 DIMM_A1 DIMM_A1 DIMM_A1 DIMM_A1
Single-channel*
Dual-channel
Dual-channel
Dual-channel
Dual-channel
Populated with DIMM
* Install only one memory module for single-channel memory configuration.