Asus RS260-E3/RS8 - Manual (Page 41)

A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1
9. Re-connect the 4-pin power plug
to the connector inside the cage.
When re-connecting the power
plug, place the PCI cage close
enough to avoid pulling the
power cable.
10. Before re-installing the PCI cage
into the chassis, check that all
cables on the PCI cage bay are
properly connected and routed.
C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y
11. Take note of the two pegs on the
PCI cage bay. These pegs should
match the holes on the cage to
make sure it fits in place.
P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s