Asus RS260-E3/RS8 - Manual (Page 64)

C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s 3 - 6 3 - 6 3 - 6 3 - 6 3 - 6
3.4 Rackmounting the server
To mount the server to the rack:
1. Align the server rails with the rack rails and push the server halfway to
the rack.
2. Align a mounting ear with the holes
on a front corner of the chassis,
then secure it with two screws.
3. Attach the other mounting ear to
the other corner of the chassis.
4. Pull the server rail lock, then push
the server all the way to the depth
of the rack.
Make sure that the mounting ear
and the rack screw holes align.
5. Drive a screw on the mounting ear
to secure the server in place.