Asus RS260-E3/RS8 - Manual (Page 57)

A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 2 - 3 7 2 - 3 7 2 - 3 7 2 - 3 7 2 - 3 7
2.7.4 2.7.4 2.7.4 2.7.4 2.7.4 Slim optical and floppy drives Slim optical and floppy drives Slim optical and floppy drives Slim optical and floppy drives Slim optical and floppy drives
To uninstall the optical and floppy disk drives:
1. Disconnect the power and signal
cables connected to the rear of
the drives.
2. Loosen the screws that secure the
drive bracket to the chassis. The
optical drive is attached to the top
of the bracket, and the floppy
drive to bottom.
3. Slide the drive bracket toward the
SCSI backplanes to release it from
the chassis, then carefully pull it
out of the drive bay.
S i g n a l c a b l e S i g n a l c a b l e S i g n a l c a b l e S i g n a l c a b l e S i g n a l c a b l e
P o w e r c a b l e P o w e r c a b l e P o w e r c a b l e P o w e r c a b l e P o w e r c a b l e