Asus AP1710-E1 - Manual (Page 56)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 3 2 2 - 3 2 2 - 3 2 2 - 3 2 2 - 3 2
2.9.3 2.9.3 2.9.3 2.9.3 2.9.3 SCSI backplane connections SCSI backplane connections SCSI backplane connections SCSI backplane connections SCSI backplane connections
(in AS8 and AS4 models only) (in AS8 and AS4 models only) (in AS8 and AS4 models only) (in AS8 and AS4 models only) (in AS8 and AS4 models only)
Two SCSI backplanes come pre-installed in the AP1710-E1 AS8 model. One
SCSI backplane comes pre-installed in the AS4 model. The SCSI backplane
has four 68-pin SCSI connectors to support SCA SCSI hard disks. The
backplane design incorporates a hot swap feature to allow easy connection
or removal of SCSI hard disks. The LEDs on the backplane connect to the
front panel LEDs to indicate HDD access, HDD failure, thermal failure, or fan
failure. See section “1.6 LED information.”
Front side Front side Front side Front side Front side
The front side of the SCSI backplane faces the front panel when installed.
This side includes four SCSI connectors for the hot swap drive trays.
H D D s t a t u s L E D s H D D s t a t u s L E D s H D D s t a t u s L E D s H D D s t a t u s L E D s H D D s t a t u s L E D s
H D D a c t i v i t y L E D s H D D a c t i v i t y L E D s H D D a c t i v i t y L E D s H D D a c t i v i t y L E D s H D D a c t i v i t y L E D s
D i s k d r i v e 1 D i s k d r i v e 1 D i s k d r i v e 1 D i s k d r i v e 1 D i s k d r i v e 1
D i s k d r i v e 2 D i s k d r i v e 2 D i s k d r i v e 2 D i s k d r i v e 2 D i s k d r i v e 2
D i s k d r i v e 3 D i s k d r i v e 3 D i s k d r i v e 3 D i s k d r i v e 3 D i s k d r i v e 3
D i s k d r i v e 4 D i s k d r i v e 4 D i s k d r i v e 4 D i s k d r i v e 4 D i s k d r i v e 4