Asus AP1710-E1 - Manual (Page 86)

C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s 3 - 4 3 - 4 3 - 4 3 - 4 3 - 4
6. Insert the tabs into the holes.
You may need to swing the
bracket a bit from left to right
and back to fully insert the
tabs.
7. When the tabs are fully inserted
in the holes, swing the bracket
to the right until one side is flat
to the chassis.
8. Secure the bracket with two
screws in the holes indicated.
Securing the bracket with the two screws also secures the left side of
the SCSI drive cage.