Asus AP1710-E1 - Manual (Page 87)

3 - 5 3 - 5 3 - 5 3 - 5 3 - 5 A S U S A P 1 7 1 0 - E 1 A S U S A P 1 7 1 0 - E 1 A S U S A P 1 7 1 0 - E 1 A S U S A P 1 7 1 0 - E 1 A S U S A P 1 7 1 0 - E 1
3.2 Installing an IDE drive cage
Perform this installation if you wish to upgrade your 4-SCSI configuration
system (AS4) to a combination of 4-SCSI/4-IDE configuration.
Clear the space under the first SCSI drive cage. Make sure that you
disconnect all pre-connected cables so they do not get in the way when
you install the second drive cage.
4 - S C S I c o n f i g u r a t i o n 4 - S C S I c o n f i g u r a t i o n 4 - S C S I c o n f i g u r a t i o n 4 - S C S I c o n f i g u r a t i o n 4 - S C S I c o n f i g u r a t i o n 4 - S C I / 4 - I D E c o n f i g u r a t i o n 4 - S C I / 4 - I D E c o n f i g u r a t i o n 4 - S C I / 4 - I D E c o n f i g u r a t i o n 4 - S C I / 4 - I D E c o n f i g u r a t i o n 4 - S C I / 4 - I D E c o n f i g u r a t i o n
To install an IDE drive cage:
1. Position the drive cage into the
bay with the screw hole tab on
top and facing out.
2. Carefully slide the drive cage
toward the front panel until it
fits in place.