Acer Altos G700 - Manual (Page 50)

3 Upgrading the system 40
Note: The illustration below shows the Altos G700 server chassis.
Removing the side panel
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system unit on a flat, stable surface.
4 Remove the front bezel.
Refer to the preceding section for detailed instructions.
5 Loosen the three thumbscrews located at the end of the left panel
closest to the front panel (1). Keep them for later use.
BB!H811!.!FO/cppl!!Qbhf!51!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN