Acer Altos G700 - Manual (Page 8)

viii
Installation precautions 37
Opening the server 39
Opening the front bezel 39
Removing the front bezel 39
Removing the side panel 40
Removing the air baffle 41
Configuring the hot-swappable
BPL4 cage
43
Removing the BPL4 cage 43
Installing a hard disk into the BPL4 cage
hard disk carrier
44
Installing the BPL4 cage 46
Configuring the SCSI cable cage 47
Removing the SCSI cable cage 47
Installing a hard disk into the SCSI cable cage 48
Installing the SCSI cable cage 49
Installing and removing storage devices 50
Replacing the 3.5-inch floppy drive 50
Installing a 5.25-inch storage device (optional) 52
Upgrading the CPU 55
To remove a CPU with heatsink 55
To install a CPU with heatsink 56
Upgrading the system memory 57
To remove a DIMM 57
To install a DIMM 58
Installing an expansion card 60
To install an expansion card 60
Installing a redundant power supply module 63
To install a redundant power supply module 64
Installing a hot-swappable HDD fan 66
To remove a hot-swappable HDD fan 66
To install a hot-swappable HDD fan 67
4 BIOS setup 69
BIOS setup 72
Entering BIOS setup 73
Main 75
Advanced 77
Super I/O Configuration 78
IDE Configuration 79
Floppy Configuration 83
PCI/PnP Configuration 84
Boot Settings Configuration 86
BB!H811!.!FO/cppl!!Qbhf!wjjj!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN