Acer Altos G700 - Manual (Page 53)

43
Configuring the hot-swappable
BPL4 cage
This section includes instructions for removing and installing the
hot-swappable BPL4 cage as well as procedures on how to install a
hard disk into the cage’s hard disk carrier.
Note: The BPL4 cage feature is only applicable to the Altos G700
model.
Removing the BPL4 cage
Important: Before detaching the BPL4 cage from the chassis,
make sure to first remove all hard disks from their carriers. For
instructions, refer to the succeeding section.
1 Detach the chassis panels and remove the air baffle.
2 Loosen the four thumbscrews that secure the cage to the chassis
(1).
3 Slightly pull out the cage from the chassis (2).
BB!H811!.!FO/cppl!!Qbhf!54!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN