Acer Altos G700 User Manual
Page 55
Advertising
45
2
Remove the four screws to open the hard disk carrier. Keep the
screws for later use.
3
When applicable, pull out any previously installed hard disk.
4
Install a hard disk on the hard disk carrier then secure it with the
four screws you have removed earlier.
5
Insert the hard disk carrier into the cage with the lever still
extended.
6
Push the lever back until it clicks into place. Make sure that the
drive is properly inserted before closing the lever.
BB!H811!.!FO/cppl!!Qbhf!56!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN
Advertising