Acer Altos G700 - Manual (Page 54)

3 Upgrading the system 44
4 Disconnect the following cables from the cage:
a SCSI cable
b SCSI drive power cable
c SCSI drive fault LED cable
5 Pull out the cage from the chassis.
Installing a hard disk into the BPL4 cage
hard disk carrier
Note: You need not remove the BPL4 cage from the chassis to
install a hard disk into the cage’s hard disk carrier.
1 Press your finger to the SCSI drive release lever (1), then pull out
the hard disk carrier from the cage (2).
BB!H811!.!FO/cppl!!Qbhf!55!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN