Acer Altos G700 - Manual (Page 58)

3 Upgrading the system 48
Installing a hard disk into the SCSI cable cage
1 Remove the SCSI cable cage from the chassis. Refer to the
instructions in the preceding section.
2 Remove the four screws that secure a previously installed hard disk
to the cage then pull it out.
3 Install a new hard disk into the cage then secure it with the four
screws you removed earlier.
4 Reinstall the SCSI cable cage to the chassis. Refer to the
instructions in the subsequent section.
BB!H811!.!FO/cppl!!Qbhf!59!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN