Acer Altos G700 - Manual (Page 66)

3 Upgrading the system 56
To install a CPU with heatsink
If only one CPU is to be installed, it must be installed in the CPU 1
socket; if such is the case, the CPU 2 socket no longer requires a
termination module.
1 Observe the ESD precautions and pre-installation procedures
described on page 37.
2 Locate the CPU socket on the mainboard.
3 Align the CPU to its socket, making sure that pin 1 (indicated by
the notched corner) of the CPU connects to hole 1 of the socket
(on the bottom right corner).
4 To install the CPU to its socket, follow the steps below:
(1) Insert the CPU into the socket.
(2) Press down the retainer lever to lock the CPU in place.
5 Observe the post-installation instructions described on page 38.
BB!H811!.!FO/cppl!!Qbhf!67!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN