Installing the bpl4 cage – Acer Altos G700 User Manual
Page 56
Advertising
![background image](/manuals/309723/56/background.png)
3 Upgrading the system
46
Installing the BPL4 cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the SCSI backplane board:
a
SCSI cable
b
SCSI drive power cable
c
SCSI drive fault LED cable
3
Attach the other end of these cables to the corresponding
connectors on the mainboard.
Refer to “Mainboard layout” on page 14 for the location of the
connectors.
4
Insert the BPL4 cage into the housing (2), then tighten the four
thumbscrews to secure it to the chassis (1).
5
Reinstall the air baffle and the chassis panels.
BB!H811!.!FO/cppl!!Qbhf!57!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN
Advertising