Xylem 19-001-350R2 PACE Integrated Pump Controller Human Machine Interface (HMI) for the Silent Storm VFD Pumping System – Technician Guide - Manual (Page 33)

33
Figure 76: Alarms & Events
All reports can be printed using [Print], after a
printer has been set up by clicking on [Print Setup].
Historical Report
Select [Historical Report] from the Web Reports
menu.
Historical Report allows you to access the data and
bar graph representation of your station’s Annual,
Monthly, and Weekly Flow information. The actual
gallons are shown in the data table on the left, and
three bar graphs (annual, monthly, and weekly) on
the right.
All reports can be printed using [Print], after a
printer has been set up by clicking on [Print Setup].
Figure 77: Historical Report
Usage Report
Select [Usage Report] from the Web Reports Menu.
Usage Report allows you to view the totalized flow
values for each day, week, month, and year. The
table in the middle on the left shows the times or
counters when totalizers reset. Table on bottom left
shows the number of starts, and runtime hours for
each pump.
Figure 78: Usage Report
Smart Phone and PDA access:
A simpler web page is available for smart phone
access. The IP address of this page is the external
address determined in appendix “G”, but a specific
page address is required to access the simplified
page: “<myIPAddress>/sma/logon.asp” where
<myIPAddress> is the external IP address. Note
that “192.168.1.15” will never be the correct
address since the smartphone or PDA is always
attempting to access the page from outside your
network.