Xylem CG 843P - Manual (Page 13)

Overview
85
Electrodes Socket acc. to DIN 19 262 or BNC
4-mm socket for reference electode
Temp. probe 4-mm socket for temperature probe
Interface/
analog output Bidirectional RS 232 interface or ana-
log output with autom. recognition of
the PC, printer, or recorder connected
Plug-in power
supply 2 pole special Friwo
Connectors
AutoCal TEC With Technical buffers, pH values
2.00; 4.00; 7.00; 10.00 at 25 °C;
buffers are temperature compensa-
ted in the range 0 ... 90 °C
AutoCal DIN With standard buffers according to
DIN 19 266/NIST, pH values:
1.68; 4.01; 6.87; 9.18 at 25 °C;
buffers are temperature compensa-
ted in the range 0 ... 90 °C
ConCal With any buffers; one and two-point
calibration, manual acceptance of
measured values and temp. input
Print principle Matrix thermoprint
signs per line 26
printing width 46.1 mm
width of printing paper 58 mm
printing speed 40 signs/sec
Calibration modes
Printer