YSI DIQ/S 182 XT-4-PR User Manual
Page 34
Advertising
Installation
System 182 XT-4
3 - 20
ba76027e01
02/2012
Fig. 3-12 Prepared cable end
Connecting the cables
The SNCIQ and SNCIQ/UG cables are connected to the terminal strip
in the same way as the SACIQ sensor connection cable (see
section 3.6.5):
SNCIQ
SNCIQ/UG
approx. 35 mm
approx. 45 mm
approx. 45 mm
1
Open the enclosure of the DIQ/S 182 XT-4-PR or the
MIQ module.
2
Select a free SENSORNET connection. At the same time, look
out for the SENSORNET designation on the label on the
bottom of the enclosure.
Advertising