YSI MIQ/Blue PS Set - Manual (Page 28)

Installation MIQ/Blue PS
3 - 18 ba76095e02 01/2013
Connecting the power
line
Fig. 3-12 Inserting the supply line.
5 Open the enclosure.
6 Screw a cable gland (pos. 1 in Fig. 3-12) with sealing ring (pos.
2) into the enclosure below the power supply connection.
7 Loosen the coupling ring (pos. 3).
8 Feed the power line through the cable gland into the enclosure.
When doing so bend the flexible divider (pos. 4) to the right.
1
3
2
L
N
4